| About |
|---|
| It is a low loss LDPE compound for coaxial cables. LE6006 contains a special type of antioxidant, which does not adversely affect the electrical properties. Applications LE6006 is intended for: Bamboo constructed cables Coaxial cables Inner skin of radio frequency cables Telephone wires Specifications LE6006 meets the following material classification: ISO 1872-PE, KGHN, 18-D003 ASTM D 1248 Type I, Class A, Category 5, Grade E4, E5 The following cable material standards are met by LE6006: EN 50290-2-23 DIN VDE 0207, 2YI3 Cables manufactured with LE6006 using sound extrusion practice normally comply with the following cable product standards: IEC 61196 EN 50117 Special Features LE6006 consists of specially selected components to offer: Low dielectrical loss Smooth surface Excellent surface finish High output&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good Electrical Properties,Quick molding cycle,Inoxidizability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.30 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃, 100% non-ionic surfactant, F20 | > 96.0 | hr | IEC 60811-4-1/B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 1 second | 50 | ISO 868 | |
| tensile strength | |||
| yield | 15.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 600 | % | ISO 527-2/500 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Dielectric strength | 22 | kV/mm | IEC 60243-1 |
| Dielectric constant | |||
| 1 MHz | 2.29 | IEC 60250 | |
| Dissipation factor | |||
| 1 MHz | 8.0E-5 | IEC 60250 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 150 to 210 | °C | |
| Melt temperature | 180 to 220 | °C | |
| Nozzle temperature | 200 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Procedure A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |