| About |
|---|
| CT7200 is a low-density polyethylene homopolymer for extrusion coating, produced with high pressure tubular technology. CAS-No. 9002-88-4&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PE homopolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat sealing,Renewable resources,Low odor,Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ISO 1133 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 240 | °C | |
| Barrel 2 zone temperature | 290 | °C | |
| Barrel 3 zone temperature | 315 | °C | |
| Barrel 4 zone temperature | 315 | °C | |
| Barrel 5 zone temperature | 315 | °C | |
| Connector temperature | 305 to 310 | °C | |
| Nozzle temperature | 305 to 310 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |