Borealis PP EE106AEB

About
EE106AEB is a 15% mineral reinforced impact modified polypropylene compound suitable for injection moulding.&&

Product Description
Supplier	Borealis AG
Generic	PP not specified
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,Renewable resources
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.992	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	15	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Bending modulus	1660	MPa	ISO 178
bending strength	28.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/1A
0℃	5.5	kJ/m²	ISO 180-1A
23℃	18	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	55.0	℃	ISO 75-2/Ae
Vicat Softening Temp
B50	52.0	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	100	mm/min	ISO 3795

Process Conditions
injection	Nominal value	Unit	Test method
Mold temperature	30 to 50	°C
Hold pressure	30.0 to 60.0	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.