Borealis PP RA130E-1498

About
RA130E-1498 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is white coloured. The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. RA130E-1498 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. DIN 8078 DIN 8077 EN ISO 15874 The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation&&

About

RA130E-1498 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is white coloured. The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. RA130E-1498 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. DIN 8078 DIN 8077 EN ISO 15874 The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation&&

Product Description
Supplier	Borealis AG
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Low liquidity,High impact resistance,Corrosion Resistant,High Heat Resistance,Low odor,High molecular weight,Random copolymer,Durability,Welding
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	0.25	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	900	MPa	ISO 527-1-2
tensile strength
yield	25.0	MPa	ISO 527-2/50
Tensile strain
yield	14	%	ISO 527-2/50
Bending modulus	800	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	2.0	kJ/m²	ISO 179/1eA
0℃	3.5	kJ/m²	ISO 179/1eA
23℃	20	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-20℃	40	kJ/m²	ISO 179/1eU
0℃	No Break		ISO 179/1eU
23℃	No Break		ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD：0~70℃	1.5E-4	1/℃	DIN 53752
Thermal conductivity coefficient	0.24	W/m/K	DIN 52612

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	180 to 210	°C
Barrel 2 zone temperature	180 to 210	°C
Barrel 3 zone temperature	180 to 210	°C
Barrel 4 zone temperature	180 to 210	°C
Barrel 5 zone temperature	180 to 210	°C
Melt temperature	210 to 220	°C
Nozzle temperature	210 to 220	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.