| About |
|---|
| RB206MO-06 is a random copolymer with good transparency and contact clarity, very good gloss and surface finish The high stiffness of this grade allows for a reduction in cycle time. This grade also features high heat distortion temperature. The additives are optimized to provide reduced tendency for mould plate-out.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Clarity,Good surface appearance,Renewable resources,Random copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.902 | g/cm³ | ISO 1183 |
| Apparent density | 0.50 to 0.60 | g/cm³ | |
| Melt Flow Rate | |||
| 230℃，1.90kg | 1.9 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1150 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 26.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 12 | % | ISO 527-2/50 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 7.0 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 86.0 | ℃ | ISO 75-2/B |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 190 to 220 | °C | |
| Melt temperature | 180 to 220 | °C | |
| Nozzle temperature | 180 to 220 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |