| About |
|---|
| TD315BF is a C2/C4 terpolymer This grade is designed for sealing layers of oriented and non oriented films CAS-No.: 25895-47-0 Applications TD315BF is recommended for: Sealing layer in coextrusion Food packaging Lamination films Additives TD315BF contains antiblock and slip agents Special features TD315BF is optimised to deliver: Lowest volatiles and fumes during processing High seal strength and hot tack force Low content of amorphous polymer High sealing window Low taste & odour Excellent optical properties Excellent printability Optimised balance between high melting point for easy processing and low sealing temperature Good stability of surface tension&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat sealing,Smoothness,Renewable resources,Good Printability,High anti-blocking,Low odor,Weight distribution,Terpolymer,Low temperature heat sealing |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 6.0 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Initial sealing temperature | |||
| 30 µm | 103 | ℃ |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 130 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 3 N, ABA structure, 1/28/1 µm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |