| About |
|---|
| Borlink LE0516 is a crosslinkable black polyethylene compound, specially designed for semiconductive strippable insulation screen of energy cables.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Crosslinked |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 11.0 | MPa | ISO 527-2/508 |
| Tensile strain | |||
| fracture | 300 | % | ISO 527-2/508 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -35.0 | ℃ | ASTM D746 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | |||
| 136℃，168 hr | < 25 | % | ISO 527 |
| Change in Tensile Strain at Break（136℃，168 hr） | > 100 | % | ISO 527 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | ISO 3915 | ||
| 23℃ | < 50 | ohms·cm | ISO 3915 |
| 90 ℃ | < 5.0E+2 | ohms·cm | ISO 3915 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cable Strip | 20 to 50 | N/cm | AEIC CS8 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 115 to 125 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |