| About |
|---|
| Borlink LH4201R is a crosslinkable natural polyethylene compound, specially designed for insulation of energy cables. Applications Borlink LH4201R is intended for insulation of XLPE power cables with rated voltages up to 72 kV. It is designed for cable constructions with bonded insulation shields. Specifications Borlink LH4201R meets the applicable requirements as below when processed using sound extrusion practices and testing procedures Cenelec HD 620 S1, Part 1, table 2A, DIX 3 to 14 DIN VDE 0276-620 GOSTR 55025-2012 IEC 60502-2 IEC 60840 Special Features Borlink LH4201R is a ready-to-use natural co-polymer compound. It provides superior electrical performance (polymer WTR XLPE) meeting the most stringent wet ageing requirements. It offers excellent scorch resistance and long production runs. Borlink LH4201R cleanliness level is assured through the Borealis quality control system.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,Crosslinked,High Heat Resistance,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.8 | g/10min | ISO 1133 |
| Moisture | < 200 | ppm | Karl Fisher |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 17.0 | MPa | ISO 527-2/250 |
| Tensile strain | |||
| fracture | > 450 | % | ISO 527-2/250 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermosetting | IEC 60811-507 | ||
| Elongation under load: 200 ℃ | 75 | % | IEC 60811-507 |
| Permanent deformation: 200 ℃ | 5.0 | % | IEC 60811-507 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Change in Tensile Strain at Break in Air（135℃，168 hr） | < 20 | % | IEC 60811-401 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+16 | ohms·cm | IEC 60093 |
| Dielectric strength | > 22 | kV/mm | IEC 60243-1 |
| Dielectric constant | |||
| 50 Hz | 2.30 | IEC 60250 | |
| Dissipation factor | |||
| 50 Hz | 5.0E-4 | IEC 60250 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Methanol Wash | < 500 | ppm | Internal Method |
| Monsanto ODR | 30.0 to 38.0 | dN·m | ASTM D2084 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 125 to 135 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 MPa |
| 3. 50 Hz |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |