Bormed™ LE6600-PH

About
Bormed LE6600-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6600-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Bormed LE6600-PH may be sterilized by steam, ethylene oxide or gamma radiation. CAS-No.9002-88-4&&

About

Bormed LE6600-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6600-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Bormed LE6600-PH may be sterilized by steam, ethylene oxide or gamma radiation. CAS-No.9002-88-4&&

Product Description
Supplier	Borealis AG
Generic	LDPE
Material Status	Commercial: Active
Features	Good flexibility,Renewable resources,Soft
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	1.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
50 mm	250	MPa	ISO 527-2
tensile strength
yield	10.0	MPa	ISO 527-2/50
Bending modulus	250	MPa	ISO 178

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	165 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.