Bormed™ RB845MO

About
Bormed RB845MO is a resin intended for evaluation for use in Healthcare applications. Bormed RB845MO is a random copolymer for use in blow moulding, including BFS technology, and ISBM ( 1-stage process) technologies. It can be used for ampoules and bottles up to maximum of 2 litres resulting in a good contact clarity, gloss and surface finish. The bottles can be steam sterilised at 121 °C. Material can also be sterilised with ethylene oxide. Applications Bormed RB845MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RB845MO . Ampoules/small bottles for eye, ear & nose drops Bottles for IV-solutions Bottles/ampoules for injectable solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.&&

About

Bormed RB845MO is a resin intended for evaluation for use in Healthcare applications. Bormed RB845MO is a random copolymer for use in blow moulding, including BFS technology, and ISBM ( 1-stage process) technologies. It can be used for ampoules and bottles up to maximum of 2 litres resulting in a good contact clarity, gloss and surface finish. The bottles can be steam sterilised at 121 °C. Material can also be sterilised with ethylene oxide. Applications Bormed RB845MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RB845MO . Ampoules/small bottles for eye, ear & nose drops Bottles for IV-solutions Bottles/ampoules for injectable solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.&&

Product Description
Supplier	Borealis AG
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,Steam sterilized,Renewable resources,High Heat Resistance,Random copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.902	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	1.9	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	7.0	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	83.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	83		ISO 2039-2
Tensile modulus	1000	MPa	ISO 527-1-2
tensile strength
yield	26.0	MPa	ISO 527-2/50
Tensile strain
yield	13	%	ISO 527-2/50

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	190 to 220	°C
Barrel 2 zone temperature	190 to 220	°C
Barrel 3 zone temperature	190 to 220	°C
Barrel 4 zone temperature	190 to 220	°C
Barrel 5 zone temperature	190 to 220	°C
Melt temperature	180 to 220	°C
Nozzle temperature	180 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.