| Bormed RD804CF is a random copolymer with low ethylene content. The current version of Bormed RD804CF has been scheduled for deletion. Please refer to Bormed RD804CF-11 documentation for new projects. In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer. This grade is suitable for the manufacturing of non-oriented cast films on chill roll process, blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles. CAS-No.: 9010-79-1 Applications Bormed RD804CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RD804CF . Medical device packaging Secondary packaging Pouches for Continuous Ambulatory Peritoneal Dialysis Caps and closures Parenteral nutrition bags Bottles/ampoules for injectable solutions Pouches for IV solutions Ampoules/small bottles for eye, ear & nose drops Extension and connection tubings Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features Good optical properties High water vapour barrier Good impact strength Sterilisability by means of water steam&& |
