BorPEX™ HE2590

About
BorPEX HE2590 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X) Applications BorPEX HE2590 is recommended for the production of crosslinked pipes used in Domestic water Heating Relining Plumbing Industrial applications Domestic gas District heating The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer with integrated EVOH layer and aluminium multilayer pipes. Specifications BorPEX HE2590 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. DIN 16892 DIN 16893 EN ISO 15875 ASTM F 876 Special features BorPEX HE2590 is a ready made compound in pellet form for the production of crosslinkable pipes by the electron beam beta-irradiation process (PE-Xc) and included is a specially selected additive package to ensure: Enhanced processability Economical pipe production Excellent product consistency Effective crosslinking behaviour High temperature resistance High resistance to additive washout&&

About

BorPEX HE2590 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X) Applications BorPEX HE2590 is recommended for the production of crosslinked pipes used in Domestic water Heating Relining Plumbing Industrial applications Domestic gas District heating The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer with integrated EVOH layer and aluminium multilayer pipes. Specifications BorPEX HE2590 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. DIN 16892 DIN 16893 EN ISO 15875 ASTM F 876 Special features BorPEX HE2590 is a ready made compound in pellet form for the production of crosslinkable pipes by the electron beam beta-irradiation process (PE-Xc) and included is a specially selected additive package to ensure: Enhanced processability Economical pipe production Excellent product consistency Effective crosslinking behaviour High temperature resistance High resistance to additive washout&&

Product Description
Supplier	Borealis AG
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Excellent Processability,Crosslinked,Crosslinked radiation,High Heat Resistance,High molecular weight
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.944	g/cm³	ISO 1183
Melt Flow Rate
190℃，21.6kg	8.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	18.0	MPa	ISO 527-2/50
Tensile strain
fracture	> 600	%	ISO 527-2

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	210 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Compound
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.