BorSafe™ HE3490-LS-H

About
BorSafe HE3490-LS-H is a bimodal polyethylene compound produced by the advanced Borstar technology. It includes a combination of pigments and stabilisers to ensure excellent long-term thermal stability and UV-resistance. BorSafe HE3490-LS-H is classified as an MRS 10.0 material (PE100). It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole range of diameters. BorSafe HE3490-LS-H is a high density hexene copolymer compound with an oustanding resistance to slow crack growth.&&

About

BorSafe HE3490-LS-H is a bimodal polyethylene compound produced by the advanced Borstar technology. It includes a combination of pigments and stabilisers to ensure excellent long-term thermal stability and UV-resistance. BorSafe HE3490-LS-H is classified as an MRS 10.0 material (PE100). It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole range of diameters. BorSafe HE3490-LS-H is a high density hexene copolymer compound with an oustanding resistance to slow crack growth.&&

Product Description
Supplier	Borealis AG
Generic	HDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Good tear strength,Hexene copolymers,Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density			ISO 1183
—	0.959	g/cm³	ISO 1183
—	0.948	g/cm³	ISO 1183
Melt Flow Rate
190℃，5.0kg	0.25	g/10min	ISO 1133
Carbon black content	2.0 to 2.5	%	ISO 6964

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1100	MPa	ISO 527-1-2
tensile strength
yield	25.0	MPa	ISO 527-2/50
Tensile strain
fracture	> 600	%	ISO 527-2
Resistance to Rapid Crack Propagation，Pc – S4 test（0℃）	> 10.0	bar	ISO 13477
Slow crack growth in cut pipe materials
80℃	> 5000	hr	ISO 13479

THERMAL	Nominal value	Unit	Test method
Oxidation induction time
210℃	> 20	min

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	190 to 210	°C
Barrel 2 zone temperature	190 to 210	°C
Barrel 3 zone temperature	190 to 210	°C
Barrel 4 zone temperature	190 to 210	°C
Barrel 5 zone temperature	190 to 210	°C
Melt temperature	200 to 220	°C
Nozzle temperature	200 to 210	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.