| About |
|---|
| Borstar FB2230 is a high molecular weight linear low density polyethylene film grade combining good and flexible extrusion behaviour, excellent draw down and superior mechanical properties For films made of Borstar FB2230 , the high toughness remains in cold conditions. CAS-No.: 25087-34-7 Applications Borstar FB2230 has been developed especially for applications like: Agricultural films Heavy-duty sack Food packaging Lamination films Frozen food packaging General packaging film Additives Borstar FB2230 contains antioxidant.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good dissection,Inoxidizability,High molecular weight,Low temperature toughness |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.20 | g/10min | ISO 1133 |
| 190℃，5.0kg | 0.90 | g/10min | ISO 1133 |
| thickness | 40 | mm | |
| Moisture permeability | 8.00 | g/m²/day | ISO 15106-2 |
| High load melt index | 22 | ISO 1133 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | 250 | MPa | ISO 527-3 |
| Secant modulus | 300 | MPa | ISO 527-3 |
| Bending modulus | MPa | ISO 178 | |
| Tensile modulus | MPa | ISO 527-2 | |
| Membrane tensile strength | 55.0 | MPa | ISO 527-3 |
| Membrane tensile strength | 45.0 | MPa | ISO 527-3 |
| Elastic modulus | MPa | ISO 527 | |
| tensile strength | MPa | ISO 527-2 | |
| Elongation at membrane rupture | 450 | % | ISO 527-3 |
| Elongation at membrane rupture | 750 | % | ISO 527-3 |
| Elmendorf strength | 0.0750 | g/mm | ISO 6383/2 |
| Elmendorf strength | 0.275 | g/mm | ISO 6383/2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | >=124 | ℃ | ISO 11357-3 |
| Vicat Softening Temp | |||
| A50 | 101 | ℃ | ISO 306/A50 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Drop hammer impact | |||
| forty μ m. Blown film | 250 | g | ISO 7765-1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Blown Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |