| About |
|---|
| Borstar FB2310 is a high molecular weight linear low density polyethylene film grade combining good and flexible extrusion behaviour, excellent draw down and superior mechanical properties. For films made of Borstar FB2310 , the high toughness remains in cold conditions. Borstar FB2310 contains antioxidant.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good dissection,Inoxidizability,High molecular weight,Low temperature toughness |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.931 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 0.20 | g/10min | |
| 190℃，21.6kg | 20 | g/10min | |
| 190℃，5.0kg | 0.90 | g/10min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| Self dynamic, blow molded film | 0.40 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 40 | µm | |
| Tensile modulus | ISO 527-3 | ||
| MD, 40 µ m, blow molded film | 300 | MPa | |
| TD, 40 µ m, blow molded film | 400 | MPa | |
| tensile strength | ISO 527-3 | ||
| MD, 40 µ m, blow molded film | 50.0 | MPa | |
| TD, 40 µ m, blow molded film | 40.0 | MPa | |
| Tensile strain | ISO 527-3 | ||
| MD, fracture, 40 µ m, blow molded film | 400 | % | |
| TD, fracture, 40 µ m, blow molded film | 700 | % | |
| Drop hammer impact | |||
| 40 µ m, blow molded film | 230 | g | ISO 7765-1 |
| tear strength | ISO 6383-2 | ||
| MD，40 µm | 50.0 | kN/m | |
| TD，40 µm | 250.0 | kN/m |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Instrumented Throwing Impact – Total Penetration Energy | |||
| 40.0 µm | 200 | J/cm | ISO 7765-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 127 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 40 µ m, blow molded film | 7 | ASTM D2457 | |
| Haze | |||
| 40 µ m, blow molded film | 80 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 190 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Blown Film |
| 3. Blown Fim |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |