| About |
|---|
| Product Information: BP Flex TPV’s are partially vulcanized thermoplastic elastomers designed to meet higher end applications that require the following performance criteria. Features: Higher service temperatures ( Under hood applications) For applications that require Increased chemical and oil resistance Valves – seals, Grommets, Under Hood Applications Reprocessable Processing Method: Injection Molding and Some Extrusion Applications Chemically bonds with polyethylene and polypropylene for overmold applications – Grommets, pads&& |
| Product Description | |
|---|---|
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Renewable resources,Grease resistance,Solvent resistance,Agglomerability |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | |
| Water absorption rate | |||
| 24hr | 0.15 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 10 seconds | 87 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |