BRALEN® FB 2-17

About
BRALEN FB 2-17 is a film grade of low density polyethylene. This grade is additives free. Applications BRALEN FB 08-65 is designed for production of shrink, technical and other packaging films. This grade can be used also for production of carrier bags. Recommended film thickness is 0.04 – 0.10 mm. BRALEN FB 08-65 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

BRALEN FB 2-17 is a film grade of low density polyethylene. This grade is additives free. Applications BRALEN FB 08-65 is designed for production of shrink, technical and other packaging films. This grade can be used also for production of carrier bags. Recommended film thickness is 0.04 – 0.10 mm. BRALEN FB 08-65 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Renewable resources,Food contact compliance,Low density
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ISO 1183/C
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
film thickness	0.04 to 0.08 mm
tensile strength			ISO 527-3
MD, 40 µ m, blow molded film	23.0	MPa	ISO 527-3
TD, 40 µ m, blow molded film	19.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 40 µ m, blow molded film	300	%	ISO 527-3
TD, fracture, 40 µ m, blow molded film	500	%	ISO 527-3
Drop hammer impact
40 µ m, blow molded film	90	g	ISO 7765-1/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	45		ISO 868

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	96.0	℃	ISO 306/A50

optical performance	Nominal value	Unit	Test method
Haze
40 µ m, blow molded film	8.0	%	ISO 14782

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	150 to 165	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.