BRALEN® NA 7-25

About
BRALEN NA 7-25 is a low density polyethylene intended mainly for extrusioin coating. This grade is additives free. Applications BRALEN NA 7-25 is designed for paper, aluminium and textile extrusion coating. Minimal recommended coat thickness is 10 g/m 2 . The materials treated in this way are suited for packaging of various goods. The low density polyethylene layer offers an advantage of heat sealing. This grade is suitable also for injection moulding of general purpose goods, technical items and toys. BRALEN NA 7-25 can be used also in mixtures with PP for extrusion coating of PP fabrics, which are intended to be used for big-bags. BRALEN NA 7-25 is suitable for food contact. The product complies with Food Contact Regulations. The grade is suitable for manufacturing of pharmaceutical packing-product.&&

About

BRALEN NA 7-25 is a low density polyethylene intended mainly for extrusioin coating. This grade is additives free. Applications BRALEN NA 7-25 is designed for paper, aluminium and textile extrusion coating. Minimal recommended coat thickness is 10 g/m 2 . The materials treated in this way are suited for packaging of various goods. The low density polyethylene layer offers an advantage of heat sealing. This grade is suitable also for injection moulding of general purpose goods, technical items and toys. BRALEN NA 7-25 can be used also in mixtures with PP for extrusion coating of PP fabrics, which are intended to be used for big-bags. BRALEN NA 7-25 is suitable for food contact. The product complies with Food Contact Regulations. The grade is suitable for manufacturing of pharmaceutical packing-product.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Good heat sealing,Renewable resources,Food contact compliance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.915	g/cm³	ISO 1183/C
Melt Flow Rate
190℃，2.16kg	7.0	g/10min	ISO 1133

film	Nominal value	Unit	Test method
film thickness
test	40	µm
tensile strength			ISO 527-3
MD, 40 µ m, blow molded film	17.0	MPa	ISO 527-3
TD, 40 µ m, blow molded film	16.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 40 µ m, blow molded film	300	%	ISO 527-3
TD, fracture, 40 µ m, blow molded film	500	%	ISO 527-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	42		ISO 868

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	88.0	℃	ISO 306/A50

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	190 to 330	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.