Braskem PE EB-853/72 (Films)

About
EB853/72 is a grade produced under high pressure in a Tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. Additive: Slip Medium Antiblock Medium Applications: Lamination film; general purpose; automatic packaging of solids products (FFS) Process: Blown Film Extrusion&&

Product Description
Supplier	Braskem
Generic	LDPE
Material Status	Commercial: Active
Features	Optical performance,Low speed solidification point,Low density
Availabilitys	Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.923	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.7	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
tensile strength
TD, fracture, 40 µ m, blow molded film	20.0	MPa	ASTM D882
MD, fracture, 40 µ m, blow molded film	25.0	MPa	ASTM D882
Tensile strain
TD, fracture, 40 µ m, blow molded film	1100	%	ASTM D882
MD, fracture, 40 µ m, blow molded film	350	%	ASTM D882
Drop hammer impact
40 µ m, blow molded film	80	g	ASTM D1709
tear strength
TD, 40 µ m, blow molded film	210	g	ASTM D1922
MD, 40 µ m, blow molded film	580	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
60 °, 40.0 µ m, blow molded film	75		ASTM D2457
Haze
40 µ m, blow molded film	7.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.