Braskem PE HD3000N

About
Braskem PE HD3000N HD3000N is a High Density Polyethylene, ideal for cast film extrusion. It offers high processability, stiffness and good impact resistance. Applications: Cast film extrusion for diapers; hygienic absorbers and other specialties. Additives: It contains fenol free antioxidant additive. Process: Cast film extrusion.&&Braskem PE HD3000N HD3000N is a High Density Polyethylene, ideal for cast film extrusion. It offers high processability, stiffness and good impact resistance. Applications: Cast film extrusion for diapers; hygienic absorbers and other specialties. Additives: It contains fenol free antioxidant additive. Process: Cast film extrusion.&&

About

Braskem PE HD3000N HD3000N is a High Density Polyethylene, ideal for cast film extrusion. It offers high processability, stiffness and good impact resistance. Applications: Cast film extrusion for diapers; hygienic absorbers and other specialties. Additives: It contains fenol free antioxidant additive. Process: Cast film extrusion.&&Braskem PE HD3000N HD3000N is a High Density Polyethylene, ideal for cast film extrusion. It offers high processability, stiffness and good impact resistance. Applications: Cast film extrusion for diapers; hygienic absorbers and other specialties. Additives: It contains fenol free antioxidant additive. Process: Cast film extrusion.&&

Product Description
Supplier	Braskem
Generic	HDPE
Material Status	Commercial: Negative
Features	Good Rigidity,Excellent Processability,High impact resistance,Inoxidizability
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	7.3	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
tensile strength			ASTM D882
MD, fracture, 25 µ m, blow molded film	25.0	MPa	ASTM D882
TD, fracture, 25 µ m, blow molded film	20.0	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 25 µ m, blow molded film	770	%	ASTM D882
TD, fracture, 25 µ m, blow molded film	380	%	ASTM D882
Bending modulus			ASTM D790
1% secant, MD, 25 µ m, blow molded film	710	MPa	ASTM D790
1% secant, TD, 25 µ m, blow molded film	790	MPa	ASTM D790
Elmandorf tear strength			ASTM D1922
MD: 25 µ m, blow molded film	5.0	g	ASTM D1922
TD: 25 µ m, blow molded film	10	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
60 °, 25.0 µ m, blow molded film	52		ASTM D2457
Haze
25 µ m, blow molded film	47	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.