Braskem PE HDB0763

About
HDB0763 is a high density polyethylene homopolymer, developed specifically for blow molding food containers. It exhibits excellent processing characteristics and extremely low odor in the finished container. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520. Typical Applications: Blow molded small volume containers for dairy products, yogurt, juice and other liquid food packing. Process: Blow Molding Injection Blow Molding&&

About

HDB0763 is a high density polyethylene homopolymer, developed specifically for blow molding food containers. It exhibits excellent processing characteristics and extremely low odor in the finished container. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520. Typical Applications: Blow molded small volume containers for dairy products, yogurt, juice and other liquid food packing. Process: Blow Molding Injection Blow Molding&&

Product Description
Supplier	Braskem
Generic	HDPE
Material Status	Commercial: Negative
Features	Excellent Processability,Food contact compliance,Low odor,Homopolymer
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.963	g/cm³	ASTM D4883
Melt Flow Rate
190℃，2.16kg	0.72	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	190	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	84.0	℃	ASTM D648
Embrittlement temperature	< -75.0	℃	ASTM D746
Vicat Softening Temp	132	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	66		ASTM D2240
tensile strength
yield	31.0	MPa	ASTM D638
Tensile strain
fracture	600	%	ASTM D638
Bending modulus			ASTM D790
2% secant	1240	MPa	ASTM D790
tangent	1550	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.