| About |
|---|
| HDI0453U1 is a high density polyethylene with a narrow molecular weight distribution, developed for injection molding segment. Parts made from this material exhibit a shiny surface and good impact strength and stiffness. This resin has UV stabilizers. Applications: Containers and buckets. Process: Injection Molding |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Good surface appearance,High impact resistance,Weight distribution |
| Availabilitys | North America,Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.5 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic surfactant | 13.0 | hr | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 1% secant | 1210 | MPa | ASTM D638 |
| Tensile strength | |||
| yield | 29.0 | MPa | |
| fracture | 34.0 | MPa | |
| Tensile strain | |||
| yield | 7.0 | % | |
| fracture | 930 | % | |
| Bending modulus | |||
| 1% secant | 1160 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 61 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 70.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 128 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |