Braskem PE HDI0861U1

About
HDI0861U1 is a high density polyethylene copolymer with a narrow molecular weight distribution. Parts fabricated from this material exhibit a glossy surface finish, and have good impact strength and rigidity. This material meets the Food and Drug Administration requirements of 21CFR 177.1520. Applications: Specifically for boxes, trays, industrial totes, plastic containers, buckets. Process: Injection Molding.&&

About

HDI0861U1 is a high density polyethylene copolymer with a narrow molecular weight distribution. Parts fabricated from this material exhibit a glossy surface finish, and have good impact strength and rigidity. This material meets the Food and Drug Administration requirements of 21CFR 177.1520. Applications: Specifically for boxes, trays, industrial totes, plastic containers, buckets. Process: Injection Molding.&&

Product Description
Supplier	Braskem
Generic	HDPE
Material Status	Commercial: Negative
Features	Good Rigidity,Good surface appearance,High impact resistance,Weight distribution,Copolymer
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.961	g/cm³	ASTM D4883
Melt Flow Rate
190℃，2.16kg	8.5	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)	5.00	hr	ASTM D1693B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	87.0	℃	ASTM D648
Embrittlement temperature	< -75.0	℃	ASTM D746
Vicat Softening Temp	128	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ASTM D2240
tensile strength
yield	32.4	MPa	ASTM D638
Tensile strain
fracture	> 800	%	ASTM D638
Bending modulus
tangent	1.66	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.