| About |
|---|
| HDP0353 is a high density polyethylene copolymer developed for corrugated piping applications. Applications: Natural bimodal high density polyethylene copolymer resin designed for corrugated pipes of small and large diameter. Process: Pipe Extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | Copolymer,Bimodal molecular weight distribution |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ASTM D4883 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.30 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -118 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 64 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 27.0 | MPa | ASTM D638 |
| fracture | 31.7 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 9.3 | % | ASTM D638 |
| fracture | > 600 | % | ASTM D638 |
| Bending modulus | |||
| Secant | 1160 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |