Braskem PE IC 32

About
IC32 is a linear low-density polyethylene, with narrow molecular weight, produced by solution process, for injection molding. It offers good fluidity, excellent flexibility, tenacity and low warpage. It contains special antioxidant additives. Application: Resin has been specifically developed for lids molding injection, house appliances and master batch production.&&

Product Description
Supplier	Braskem
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Low warping,Good flexibility,Inoxidizability,Weight distribution
Availabilitys	Latin America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.924	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	29	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 2.00 mm, 10% non-ionic surfactant, molded, F50	< 1.00	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
Yield, molding	12.0	MPa
Fracture, molded	10.0	MPa
Tensile strain
Fracture, molded	250	%	ASTM D638
Bending modulus
23℃	320	MPa	ASTM D747
Bending modulus
1% cut, molded	370	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	95.0	℃	ASTM D1525 1

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	150 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.