| About |
|---|
| LDF2723S1 is a low density polyethylene which contains slip and antiblock additives. It has good optical properties and excellent processability. Applications: Bags and sacks, Shrink Film, Blown Film, Cast Film and Food Packaging Films. Process: Blown Film, Cast Film. |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Smoothness,High anti-blocking |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.7 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength | |||
| MD: Fracture | 25.0 | MPa | |
| TD: Fracture | 20.0 | MPa | |
| Tensile strain | |||
| MD, fracture | 350 | % | |
| TD, fracture | 1100 | % | |
| Drop hammer impact | 80 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 580 | g | |
| TD | 210 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | > 74 | ASTM D2457 | |
| Haze | < 8.0 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |