Braskem PE LL-218/21

About
Description: LL218/21 is a LLDPE Butene copolymer produced by Braskem. It was specially designed to provide outstanding processing performance. Films obtained with this grade show good physical and optical properties and enhanced sealability. Additive: Antiblocking Medium Slip Médium Applications: Liners; LDPE and HDPE blends; general use packages; technical films for automatic packaging&&

Product Description
Supplier	Braskem
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Excellent Processability,Optical performance,Low density,Copolymer
Availabilitys	Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.917	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	38	µm
tensile strength			ASTM D882
MD, fracture	30.0	MPa
TD, fracture	30.0	MPa
Tensile strain			ASTM D882
MD, fracture	1100	%
TD, fracture	1400	%
Bending modulus			ASTM D790
1% secant, MD	200	MPa
1% secant, TD	220	MPa
Drop hammer impact	100	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD	140	g
TD	340	g

optical performance	Nominal value	Unit	Test method
gloss
60°	24		ASTM D2457

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.