Braskem PE LL5801N

About
The LL5801N resin is a Linear Low Density Polyethylene, produced by solution process, for blown film extrusion with excellent mechanical properties. Application: Laminating and specialties made of high strength films. Additive: Slip Antiblocking Processing Aid Process: Blown film e extrusion&&

Product Description
Supplier	Braskem
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Smoothness,Inoxidizability,Octene copolymer
Availabilitys	Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
tensile strength
TD, fracture	25.0	MPa	ASTM D882
MD, fracture	40.0	MPa	ASTM D882
Tensile strain
TD, fracture	1100	%	ASTM D882
MD, fracture	1000	%	ASTM D882
Bending modulus
1% secant, TD	180	MPa	ASTM D790
1% secant, MD	165	MPa	ASTM D790
Drop hammer impact	220	g	ASTM D1709
Elmandorf tear strength
MD	340	g	ASTM D1922
tear strength
TD	1100	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
60°	82		ASTM D2457
Haze	8.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.