Braskem PE SEB853/72

About
Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion.&&Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion.&&Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion.&&

About

Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion.&&Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion.&&Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion.&&

Product Description
Supplier	Braskem
Generic	LDPE
Material Status	Commercial: Active
Features	Renewable resources,Optical performance,Low speed solidification point,No BPA
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.923	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	2.7	g/10min	ASTM D1238
Biobased Content	95	%	ASTM D6866

film	Nominal value	Unit	Test method
tensile strength
TD, fracture, 38 µ m, blow molded film	20.0	MPa	ASTM D882
MD, fracture, 38 µ m, blow molded film	30.0	MPa	ASTM D882
Tensile strain
TD, fracture, 38 µ m, blow molded film	1000	%	ASTM D882
MD, fracture, 38 µ m, blow molded film	270	%	ASTM D882
Drop hammer impact
38 µ m, blow molded film	70	g	ASTM D1709
Elmandorf tear strength
TD, 38 µ m, blow molded film	100	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
60 °, 38.0 µ m, blow molded film	112		ASTM D2457
Haze
38 µ m, blow molded film	5.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.