Braskem PE TS7003

About
TS7003 is a low density polyethylene (LDPE) with high molecular weight that offers high mechanical strength and toughness even at low temperatures. Additionally, this product is easily processed .The product was developed to meet the requirements for automatic packaging. The additive package provides low coefficient of friction COF, allowing high productivity on the packaging lines. This product is identified as PE 115 according to ASTM D-4976-04a standard specification. Additives: Antiblocking Slip agent Application: Films for automatic packaging of liquids such as, milk, yogurt, juices, etc. Packaging for frozen food: meat, chicken, seafood, fries, etc. Blow molding flexible packaging. Process: Blown Film Extrusion&&

About

TS7003 is a low density polyethylene (LDPE) with high molecular weight that offers high mechanical strength and toughness even at low temperatures. Additionally, this product is easily processed .The product was developed to meet the requirements for automatic packaging. The additive package provides low coefficient of friction COF, allowing high productivity on the packaging lines. This product is identified as PE 115 according to ASTM D-4976-04a standard specification. Additives: Antiblocking Slip agent Application: Films for automatic packaging of liquids such as, milk, yogurt, juices, etc. Packaging for frozen food: meat, chicken, seafood, fries, etc. Blow molding flexible packaging. Process: Blown Film Extrusion&&

Product Description
Supplier	Braskem
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Smoothness,High anti-blocking,Inoxidizability,High molecular weight,Ultra high toughness,Low temperature toughness
Availabilitys	Latin America,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.27	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Secant modulus
2% secant, TD, 70 µ m, blow molded film	150	MPa	ASTM D882
2% secant, MD, 70 µ m, blow molded film	140	MPa	ASTM D882
tensile strength
TD, fracture, 70 µ m, blow molded film	20.0	MPa	ASTM D882
MD, fracture, 70 µ m, blow molded film	20.0	MPa	ASTM D882
Tensile strain
TD, fracture, 70 µ m, blow molded film	910	%	ASTM D882
MD, fracture, 70 µ m, blow molded film	380	%	ASTM D882
Drop hammer impact
70 µ m, blow molded film	230	g	ASTM D1709
tear strength
MD, 70 µ m, blow molded film	300	g	ASTM D1922
Elmandorf tear strength
TD, 70 µ m, blow molded film	220	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss			ASTM D2457
45 °, 70 µ m, blow molded film	41		ASTM D2457
60 °, 70.0 µ m, blow molded film	54		ASTM D2457
Haze
70.0 µ m, blow molded film	20	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.