| About |
|---|
| BRASKEM C765-15NA Polypropylene Resin is a high performance impact copolymer for injection moulding applications. The grade has an improved balance of mechanical properties featuring outstanding stiffness and high impact strength even at low temperatures. The resin is nucleated and shows excellent antistatic properties. Applications: Packaging applications e.g. containers, pails, flower pots Consumer goods articles e.g. household/appliances components, crates, boxes, toys Process: Injection moulding&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 15 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20 ℃, injection molding | 6.5 | kJ/m² | ISO 179/1eA |
| 0℃ | 8.0 | kJ/m² | ISO 179/1eA |
| 23 ℃, injection molding | 12 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 90.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | 150 | ℃ | ISO 306/A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 66 | ISO 868 | |
| tensile strength | |||
| Yield, injection molding | 26.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, injection molding | 10 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 1200 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Injection Molded |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |