Braskem PP FT120WV

About
Sub-group: Homopolymer Description: Antistatic, nucleated, good mold release. Applications: Suggested uses include cosmetic packaging, disposable cutlery, closures, overcaps. Process: Injection Molding.&&

Product Description
Supplier	Braskem
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Nucleation,Good stripping performance,Food contact compliance,Disposable,Antistatic property,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	37	J/m	ASTM D256-A

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	106		ASTM D785
tensile strength
yield	38.6	MPa	ASTM D638
Tensile strain
yield	8.0	%	ASTM D638
Bending modulus
1% secant	1650	MPa	ASTM D790-A

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	227	°C
Barrel middle temperature	238	°C
Barrel front temperature	238	°C
Nozzle temperature	221	°C
Processing (melt) temperature	> 164	°C
Mold temperature	21.1 to 48.9	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.