Braskem PP H502-25RZ

About
Braskem H502-25RZ Polypropylene Resin is a homopolymer resin suitable for the use in spunbonded nonwovens production equipment. Braskem H502-25RZ Polypropylene Resin can also be used in other Fiber spinning processes. Braskem H502-25RZ Polypropylene Resin is a controlled rheology polypropylene offering excellent processability at melt temperatures between 220 and 280°C. Applications for Braskem H502-25RZ Polypropylene Resin: Nonwovens for health and hygiene Carpet face yarns Geotextiles Upholstery Filtration Agricultural materials Complies with: EU, No 10/2011 U.S. FDA 21 CFR 177.1520(c)1.1 Consult the regulations for complete details.&&

About

Braskem H502-25RZ Polypropylene Resin is a homopolymer resin suitable for the use in spunbonded nonwovens production equipment. Braskem H502-25RZ Polypropylene Resin can also be used in other Fiber spinning processes. Braskem H502-25RZ Polypropylene Resin is a controlled rheology polypropylene offering excellent processability at melt temperatures between 220 and 280°C. Applications for Braskem H502-25RZ Polypropylene Resin: Nonwovens for health and hygiene Carpet face yarns Geotextiles Upholstery Filtration Agricultural materials Complies with: EU, No 10/2011 U.S. FDA 21 CFR 177.1520(c)1.1 Consult the regulations for complete details.&&

Product Description
Supplier	Braskem
Generic	PP homopolymerization
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	25	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, injection molding	30.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	10	%	ISO 527-2
Bending modulus
injection molding	1300	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23 ℃, injection molding	2.0	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	80.0	℃	ISO 75-2/B
Vicat Softening Temp	148	℃	ISO 306/A

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	220 to 280	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.