| About |
|---|
| DOW R7050-02N 聚丙烯树脂是一种无规共聚物，用于片材挤出加工和吹塑加工。DOW R7050-02N 聚丙烯树脂的特点是透明度高。 DOW R7050-02N 聚丙烯树脂的应用领域: 吹塑容器 热成型容器 法规信息 DOW R7050-02N 聚丙烯树脂应该符合美国食品和药物管理局法规 21 CFR 177.1520(c)3.1a 的要求和欧盟指令EU, No 10/2011。确保其产品的实际使用符合强制性的渗移要求是食品接触器具制造商和加工食品包装商的责任。请查询适用的法规以获取更加详尽的资料。可以从陶氏销售代表那里获取合规证明书。&& |
| Product Description | |
|---|---|
| Supplier | Braskem |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, injection molding | 25.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, injection molding | 12 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 840 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| 0 ℃, injection molding | 4.0 | kJ/m² | |
| 23 ℃, injection molding | 18 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 80.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | 129 | ℃ | ISO 306/A |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 1000 µ m, injection molding | 12 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |