| About |
|---|
| Ethylene-propylene-diene rubber (EPDM), with ethylidene norborene (ENB) as diene; amorphous; high viscosity, designed for extrusion applications where low temperature properties are required.&& |
| Product Description | |
|---|---|
| Supplier | LANXESS |
| Generic | EPDM+SEBS |
| Material Status | Commercial: Active |
| Features | High Viscosity,Amorphous |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.858 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+8，150℃ | 54 to 66 | MU | ASTM D1646 |
| Ethylene composition | 49.0 to 57.0 | wt% | ASTM D3900 |
| Ethylidene norbornene content | 5.4 to 7.6 | wt% | ASTM D6047 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |