Bynel® 4033 - SOLIAO

About
BYNEL® Series 4000 resins are anhydride-modified, high-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL 4033 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. BYNEL Series 4000 resins are excellent moisture barriers and have a good hydrocarbon resistance. This unique combination of properties makes them useful in a variety of coextrusion applications. HDPE/EVOH tubing and HDPE/polyamide bottles for agricultural chemicals are two examples. BYNEL 4000 series resins are most often used in coextrusion with EVA, EVOH, polyamide and PE.&&

About

BYNEL® Series 4000 resins are anhydride-modified, high-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL 4033 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. BYNEL Series 4000 resins are excellent moisture barriers and have a good hydrocarbon resistance. This unique combination of properties makes them useful in a variety of coextrusion applications. HDPE/EVOH tubing and HDPE/polyamide bottles for agricultural chemicals are two examples. BYNEL 4000 series resins are most often used in coextrusion with EVA, EVOH, polyamide and PE.&&

Product Description
Supplier	DuPont
Generic	HDPE
Material Status	Commercial: Active
Features	Hydrocarbons
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.950	g/cm³	ASTM D792
Density	0.950	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238
190℃，2.16kg	2.0	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	128	℃	ASTM D1525
Vicat Softening Temp	128	℃	ISO 306
Melting peak temperature	135	℃	ASTM D3418
Melting temperature
DSC	135	℃	ISO 3146
freezing point	114	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	160	°C
Barrel 2 zone temperature	185	°C
Barrel 3 zone temperature	235	°C
Barrel 4 zone temperature	235	°C
Barrel 5 zone temperature	235	°C
Connector temperature	235	°C
Melt temperature	< 260	°C
Nozzle temperature	235	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.