CABELEC® CA3842

About
CABELEC CA3842 is an electrically conductive compound based on carbon black and a polypropylene copolymer. it has very good mechanical properties and can be easily processed on conventional moulding equipment. Applications CABELEC CA3842 is recommended for the manufacture of containers and specialised mouldings. Suggested areas of application are ordnance and ammunition works, hospitals, mines, petroleum plants, electronics and other environments where freedom from the hazard of electrostatic discharge is an important consideration.&&

About

CABELEC CA3842 is an electrically conductive compound based on carbon black and a polypropylene copolymer. it has very good mechanical properties and can be easily processed on conventional moulding equipment. Applications CABELEC CA3842 is recommended for the manufacture of containers and specialised mouldings. Suggested areas of application are ordnance and ammunition works, hospitals, mines, petroleum plants, electronics and other environments where freedom from the hazard of electrostatic discharge is an important consideration.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Conductive,Copolymer,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.09	g/cm³	Internal Method
Melt Flow Rate			ISO 1133
230℃，10.0kg	22	g/10min	ISO 1133
230℃，2.16kg	0.40	g/10min	ISO 1133
230℃，5.0kg	5.0	g/10min	ISO 1133
Shrinkage rate
MD	0.80 to 1.0	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 15 seconds	66		ASTM D2240
tensile strength
fracture	15.6	MPa	ISO 527-2
yield	21.0	MPa	ISO 527-2
Tensile strain
fracture	20	%	ISO 527-2
Bending modulus	1500	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	31	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	46.0	℃	ISO 75-2/A
Vicat Softening Temp	148	℃	ISO 306/A

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	2.0E+2	ohms	Internal Method
Volume resistivity	20	ohms·cm	Internal Method

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
3.00 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	95	°C
Drying time	2.0 to 4.0	hr
Barrel rear temperature	170	°C
Barrel middle temperature	170	°C
Barrel front temperature	170	°C
Nozzle temperature	200	°C
Mold temperature	15	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.