| About |
|---|
| Caltex PP M570 is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in Asia Pacific for injection molding. Important attributes of Caltex PP M570 are: High Flow Impact Resistant Typical applications include: Appliances Automotive Electrical/Electronic Applications Housings Industrial Applications&& |
| Product Description | |
|---|---|
| Supplier | GS Caltex |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | High impact resistance,High liquidity |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 45 | g/10min | ASTM D1238 |
| Shrinkage rate | ASTM D955 | ||
| MD | 1.5 to 1.8 | % | ASTM D955 |
| TD | 1.5 to 1.8 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 64 | J/m | ASTM D256 |
| Drop hammer impact | 12.7 | J | ASTM D3029 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 125 | ℃ | ASTM D648 |
| Vicat Softening Temp | 152 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 95 | ASTM D785 | |
| tensile strength | |||
| yield | 31.4 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 10 | % | ASTM D638 |
| fracture | > 200 | % | ASTM D638 |
| Bending modulus | 1370 | MPa | ASTM D790A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |