| About |
|---|
| Description Capa™ 6800 is a high molecular weight linear polyester derived from caprolactone monomer. Supplied in granular form, approx. 3 mm pellets. Applications Capa™ 6800 is used in a variety of adhesive applications. Compatible with a wide range of common thermoplastics and soluble in several common solvents.&& |
| Product Description | |
|---|---|
| Generic | PCL |
| Material Status | Commercial: Active |
| Features | Biodegradable,High molecular weight |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 160℃，5.0kg | 2.0 to 4.0 | g/10min | |
| molecular weight | 80000 | ||
| water content | < 0.35 | % | |
| solubility | 9.34 to 9.43 | (cal/cm³ | |
| colour | |||
| Hazen | < 75 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | 800 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 58.0 to 60.0 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Particle size | 3.00 | mm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |