| About |
|---|
| CAPROWAX P™ 6006-00-000 Granulat是一种生物可降解聚合物 (Biodeg Polymers)产品,含有的填充物为71% 炭粉。 它可以通过吹塑成型、热成型、细丝挤出或注射成型进行加工,在欧洲有供货。 CAPROWAX P™ 6006-00-000 Granulat的应用领域包括纺织/纤维、添加剂/色母粒 和 胶水/胶纸。 特性包括: 环保/绿色 良好的柔韧性&& |
| Product Description | |
|---|---|
| Generic | 生物可降解聚合物 |
| Material Status | Commercial: Active |
| Features | Good dissection,Renewable resources,Mildew,Biodegradable,Aliphatic series,Compostable,Low temperature toughness |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 to 1.15 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 90℃，2.16 kg | 2.50 to 6.00 | cm³/10min | ISO 1133 |
| PH value | 7.0 to 8.0 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 54 | ISO 868 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 56.0 | ℃ | ISO 306/A50 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Softening range | 57 to 63 | ℃ | DSC |
| Temperature of hot forming mold | 75 to 85 | ℃ | |
| Blowing molding temperature | 65 to 80 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 90 to 120 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |