Cardia Biohybrid™ H-BM

About
Cardia Biohybrid™ H-BM is based on a blend of thermoplastic starch (TPS) and polyolefin’s. This grade of resin is compatibilised to offer a high level of mechanical strength, good impact resistance and toughness. The resin is based on corn starch which is a renewable material. A biohybrid resin offering a significant reduction in carbon footprint (compared to polyolefins PE/PP) An effective contribution to sustainability where biodegradability/compostability is not required Designed for thin and thick gauge rigid moulding and extrusion applications. Cardia Biohybrid™ H-BM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a wide range of products manufactured by injection moulding or extrusion processes. Due to its content of polypropylene the material is not a fully biodegradable polymer and it is not intended for ultimate disposal in commercial composting facilities. If biodegradability or compostability is required, use of Cardia Compostable B-M or TBM resin is recommended. Application Examples Blow molding of bottles, containers and jars Blow molding of multi-layer containers and bottles&&

About

Cardia Biohybrid™ H-BM is based on a blend of thermoplastic starch (TPS) and polyolefin’s. This grade of resin is compatibilised to offer a high level of mechanical strength, good impact resistance and toughness. The resin is based on corn starch which is a renewable material. A biohybrid resin offering a significant reduction in carbon footprint (compared to polyolefins PE/PP) An effective contribution to sustainability where biodegradability/compostability is not required Designed for thin and thick gauge rigid moulding and extrusion applications. Cardia Biohybrid™ H-BM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a wide range of products manufactured by injection moulding or extrusion processes. Due to its content of polypropylene the material is not a fully biodegradable polymer and it is not intended for ultimate disposal in commercial composting facilities. If biodegradability or compostability is required, use of Cardia Compostable B-M or TBM resin is recommended. Application Examples Blow molding of bottles, containers and jars Blow molding of multi-layer containers and bottles&&

Product Description
Generic	TPS+PP
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,High impact resistance,Renewable resources,Food contact compliance
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.10	g/cm³	ASTM D4883
Melt Flow Rate
190℃，2.16kg	2.5	g/10min	ASTM D1238
Biomass content
Starch	50	%

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	> 15.0	MPa	ASTM D638
Tensile strain
fracture	> 16	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	101 to 106	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.