Cardia Biohybrid™ H-F

About
Cardia Biohybrid ™ H-F is a based on a blend of thermoplastic starch (TPS) with Polyethylene. This grade of resin is compatibilised to offer a high level of mechanical strength, elongation properties and toughness. The resin is based on corn starch which is a renewable material. A Biohybrid resin for film applications offering a significant reduction in carbon footprint (compared to PE) An effective contribution to sustainability where biodegradability/compostability is not required. Designed for thin and thick gauge film applications. Cardia Biohybrid™ H-F is formulated with 50% of annually renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by blown film extrusion and extrusion blow molding as well as injection molding processes. Due its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. For applications in which compostability is required we recommend the usage of Cardia Compostable B-F resin. Application Examples Shopping bags/Check-out bags Garbage bags Leaf litter bags Bin liners Overwrap Packaging&&

About

Cardia Biohybrid ™ H-F is a based on a blend of thermoplastic starch (TPS) with Polyethylene. This grade of resin is compatibilised to offer a high level of mechanical strength, elongation properties and toughness. The resin is based on corn starch which is a renewable material. A Biohybrid resin for film applications offering a significant reduction in carbon footprint (compared to PE) An effective contribution to sustainability where biodegradability/compostability is not required. Designed for thin and thick gauge film applications. Cardia Biohybrid™ H-F is formulated with 50% of annually renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by blown film extrusion and extrusion blow molding as well as injection molding processes. Due its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. For applications in which compostability is required we recommend the usage of Cardia Compostable B-F resin. Application Examples Shopping bags/Check-out bags Garbage bags Leaf litter bags Bin liners Overwrap Packaging&&

Product Description
Generic	TPS+PE
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Renewable resources,Food contact compliance,Good Tensile Strength
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.10	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238
water content	< 0.60	%	Internal Method
Biomass content
Starch	50	%

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D883
yield	> 13.0	MPa	ASTM D883
fracture	> 13.0	MPa	ASTM D883
Tensile strain
fracture	350	%	ASTM D883

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	90.0 to 130	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.