Cariflex® IR0310 K

About
Cariflex IR0310 KU polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It has a high molecular weight as indicated by its Logarithmic Inherent Viscosity (LIV) value of 7.05 dl/g. It is supplied from North America in the physical form identified below. Cariflex IR0310 KU – supplied as a white/transparent solid bale A non-staining stabilizer is added at the typical value of 0.15%. Cariflex IR0310 KU polymer is manufactured to the highest standards but special requirements apply to certain sensitive applications such as food contact and pharmaceuticals. Reference should always be made to local legislation regulating these applications. Cariflex IR0310 KU Polymer is used as a replacement for natural rubber in a wide range of compounds, offering advantages of light color, uniformity and low levels of impurities. Its good flow characteristics produce improvements in mixing and molding behavior. It is used for food and pharmaceutical packaging and seals, baby bottle teats and health care, adhesives, chemical derivatives of rubbers and very light colored or transparent articles.&&

About

Cariflex IR0310 KU polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It has a high molecular weight as indicated by its Logarithmic Inherent Viscosity (LIV) value of 7.05 dl/g. It is supplied from North America in the physical form identified below. Cariflex IR0310 KU – supplied as a white/transparent solid bale A non-staining stabilizer is added at the typical value of 0.15%. Cariflex IR0310 KU polymer is manufactured to the highest standards but special requirements apply to certain sensitive applications such as food contact and pharmaceuticals. Reference should always be made to local legislation regulating these applications. Cariflex IR0310 KU Polymer is used as a replacement for natural rubber in a wide range of compounds, offering advantages of light color, uniformity and low levels of impurities. Its good flow characteristics produce improvements in mixing and molding behavior. It is used for food and pharmaceutical packaging and seals, baby bottle teats and health care, adhesives, chemical derivatives of rubbers and very light colored or transparent articles.&&

Product Description
Generic	IR
Material Status	Commercial: Active
Features	High purity,Good liquidity,High molecular weight
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Mooney viscosity	40 to 53	MU	ASTM D1646
1,4 cis content			Internal Method
—	> 82.0	wt%	Internal Method
—	> 90.0	wt%	Internal Method
Limiting Viscosity Number	700 to 1050	cm³/g	Internal Method
Stabilizer	0.10 to 0.30	%	Internal Method
Ash Content	< 0.10	%	Internal Method
Volatiles	< 0.50	%	Internal Method

elastic body	Nominal value	Unit	Test method
tensile strength
Flow rate, yield	> 21.6	MPa	ISO 37
300% strain	7.30 to 12.2	MPa	ISO 37
Tensile strain
fracture	> 430	%	ISO 37

Notes
1. Typical properties: these are not to be construed as specifications.
2. NMR
3. FTIR
4. Cure: 40 min at 135°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.