| About |
|---|
| Kraton IR0401 SU Latex is a water-based emulsion of an anionically polymerised polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. The emulsion also contains a non-staining antioxidant (typical level of 0.1% mass on solids) and a surfactant. Kraton IR0401 SU Latex is a synthetic rubber emulsion and can be used as an alternative to natural rubber latex in a variety of applications ranging from dipping to extrusion. It offers specific advantages such as light colour, consistency and low levels of impurities. Kraton IR0401 SU Latex is made under Good Manufacturing Practices, but additional requirements may apply to food contact, pharmaceutical and medical device applications using this material. Reference should always be made to the local legislation regulating these applications.&& |
| Product Description | |
|---|---|
| Generic | IR |
| Material Status | Commercial: Active |
| Features | High purity,High molecular weight |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Dipping coating method |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| freezing point | 0 | ℃ | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Average particle size | < 1.8 | µm | Internal Method |
| Odor | Neutral | ||
| T.A.M.C. at Drumming | < 1000 | CFU/ml | USP 24 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| 1,4 cis content | Internal Method | ||
| — | > 82.0 | wt% | Internal Method |
| — | > 90.0 | wt% | Internal Method |
| Antioxidant Additive | 0.10 | % | Internal Method |
| Limiting Viscosity Number | 670 to 920 | cm³/g | Internal Method |
| PH value | 9.5 to 12.0 | JIS Z8803 | |
| molecular weight | 1500000 to 2500000 | g/mol | Internal Method |
| Solid content | 1.1 | hr | JIS K0067 |
| Ash Content | < 0.10 | % | Internal Method |
| Gel content | 0.0 | % | |
| Brookfield viscosity | < 150 | mPa·s | JIS Z8802 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. NMR |
| 3. FTIR |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |