| About |
|---|
| Casico FR6083 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural jacketing compound combining with excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.60 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| 15 seconds | 53 | ISO 868 | |
| tensile strength | 15.0 | MPa | IEC 60811-1-1 |
| Tensile strain | |||
| fracture | 500 | % | IEC 60811-1-1 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature bending | |||
| -40℃ | Pass | ||
| Cold shock | |||
| -40℃ | Pass |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air (110 ℃, 168 hr) | -85 | % | IEC 60811-1-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 28 | % | ISO 4589-2 |
| Corrosive gases in flue gas | IEC 60754-2 | ||
| — | 7.00 | µS/cm | IEC 60754-2 |
| Acidity（pH） | 5.80 | µS/cm | IEC 60754-2 |
| Vertical Flame Test（Single） | Pass | IEC 60332-1 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot pressing test | IEC 60811-3-1 | ||
| 105℃ | 5.0 | % | IEC 60811-3-1 |
| 115℃ | 15 | % | IEC 60811-3-1 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 160 | °C | |
| Barrel 2 zone temperature | 170 | °C | |
| Barrel 3 zone temperature | 180 | °C | |
| Barrel 4 zone temperature | 190 | °C | |
| Nozzle temperature | 190 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. Limited |
| 4. 6 hours |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |