About Fluorous rubber (FKM-DS2600), commonly called 2# rubber, is white elastomer and copolymer of VDF and hexafluoropropylene, with fluorine content of over 66%. The product processed and vulcanized by raw fluorous rubber (DS2600), featured by good mechanical property and excellent…
About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Higher viscosity version of FC 2123 Medium viscosity Process targets: transfer and compression molding, bonding and calendering Proprietary incorporated cure technology Excellent release and hot tear properties essential for…
About DAI-EL G-7371 is a cure-incorporated copolymer with medium Mooney viscosity. It is designed for transfer molding, extrusion and calendering.&& Product Description Supplier Daikin Fluorochemicals Generic 氟橡胶 Material Status Commercial: Active Features Copolymer Availabilitys North America Technical Data PHYSICAL Nominal…
About DAI-EL G-7210BP is a bisphenol curable, gum copolymer. It is designed especially for injection molding of seals. Properly compounded, DAI-EL G-7210BP produces vulcanizates with excellent heat and compression set resistance.&& Product Description Supplier Daikin Fluorochemicals Generic 氟橡胶 Material Status…
About TECNOFLON® PL 557 is a new generation low temperature peroxide curable fluoroelastomer with 65.5% wt fluorine content. Tecnoflon® PL 557 exhibits excellent low temperature flexibility (TR10 = -29°C), close to Tecnoflon® PL 455, but with improved chemical resistance and…
About BDF30P is a low to medium viscosity curative incorporated fluoroelastomer copolymer. This is a general purpose grade, well suited for application where good flowability and mold release are required. BDF30P can be compounded to meet the major fluoroelastomer specifications.…
About Material Type: Brown color fluoroelastomer compound, hardness Shore A 65-75. Based on bisphenol curable copolymers. Features: Excellent mold flow, improved mold release and good compression set. Process Methods: Suitable for compression, transfer, injection and extrusion molding processes. Applications: O-rings…
About DAI-EL™ G-7211 DAI-EL G-7211 is a cure-incorporated copolymer designed for injection transfer and compression molding applications. G-7211 offers low Mooney viscosity with good compression set resistance.&&DAI-EL™ G-7211 DAI-EL G-7211 is a fluoroelastomer comprising copolymer of vinylidenefluoride and…
About DAI-EL® G-101 DAI-EL® G-101 is an ultra low molecular weight fluoroelastomer. At room temperature it is an opaque paste. At temperatures above 70°C (158 °F) it becomes a transparent, viscous fluid. DAI-EL® G-101 is not crosslinkable but is…
About High fluorine tetrapolymers formulated for low temperature flexibility. HFLT compounds are excellent choices for fuel applications, including methanol-containing fuels, where low temperature flexibility is also essential. The LT compounds are designed for low temperature applications.&& Product Description Generic 氟橡胶…
About 66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Copolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method…
About Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010&& Product Description Supplier Meilan Generic 氟橡胶 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.80 to 1.84 g/cm³ Mooney viscosity ML 1+10，121℃ 131 to 190…
About 66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Low Viscosity,Copolymer Availabilitys North America Process Methods Injection Molding…
About TECNOFLON® FOR 5351/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade has excellent flow and good compression set. Tecnoflon® FOR 5351/U can be used for molded items with complicated shapes which require a very good hot tear…
About 3M™ Dyneon™ Fluoroelastomer FC 2124 is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FC 2124 has an incorporated bisphenol cure system Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Proprietary incorporated cure technology Excellent hot tear properties…
About Material Type: Red color fluoroelastomer compound, hardness Shore A 70-80. Based on bisphenol curable copolymers. Features: Excellent mold flow, improved tear resistance and bonding adhesion. Process Methods: Suitable for compression, transfer and injection molding processes. Applications: oil seals, steam…
About TECNOFLON® PL 855 is a new generation low temperature peroxide curable medium viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 855 exhibits excellent low temperature flexibility (TR10 = -30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits…
About 66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Copolymer Availabilitys North America Technical Data PHYSICAL…
About 70% Fluorine terpolymers formulated for much improved chemical resistance. HF compounds are excellent choices for fuel applications, including methanol containing fuels.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Solvent resistance,Terpolymer Availabilitys North America Technical Data PHYSICAL Nominal…
About Greene FKM 761 is a Fluoroelastomer product. It is available in North America.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.80 g/cm³ ASTM D297 elastic body…