About Features and Benefits Composition: terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene Low viscosity Process targets: injection extrusion and calendering Proprietary incorporated cure technology&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Low Viscosity,Terpolymer Availabilitys North America,Europe Technical Data…
About DAI-EL® G-901 DAI-EL® G-901 is a terpolymer suitable for various peroxide cure systems. DAI-EL® G-901 can be formulated to eliminate the post cure process.DAI-EL® G-901 is suitable for transfer and compression molding applications requiring excellent chemical and steam…
About DAI-EL™ G-7401 DAI-EL G-7401 is a cure incorporated copolymer designed for transfer and compression molding applications. G-7401 offers medium Mooney viscosity with good compression set resistance.&&DAI-EL™ G-7401 DAI-EL G-7401 is a fluoroelastomer comprising copolymer of vinylidenefluoride and…
About 70% Fluorine terpolymers formulated for much improved chemical resistance. HF compounds are excellent choices for fuel applications, including methanol containing fuels.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Solvent resistance,Terpolymer Availabilitys North America Technical Data PHYSICAL Nominal…
About DAI-EL® G-7300EBP is a bisphenol curable, gum copolymer. It has excellent mold flow compared with copolymers of similar Mooney viscosity, which makes it well suited for compression, transfer or injection molding.&& Product Description Supplier Daikin Fluorochemicals Generic 氟橡胶 Material…
About DAI-EL® G-755 DAI-EL G-755 is a bisphenol cure-incorporated copolymer with medium Mooney viscosity. It is designed especially for extrusion molding and calendering.&&DAI-EL® G-755 DAI-EL G-755 is a fluoroelastomer comprising copolymer of vinylidenefluoride and hexafluoropropylene and containing a…
About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low shrink version of FE 5620Q Process targets: injection and transfer molding, extrusion and calendering Improved scorch resistance at high molding temperatures Proprietary incorporated cure technology Excellent mold release…
About BDF2602AP is a medium viscosity curative incorporated fluoroelastomer copolymer. This is a general purpose grade, well suited for application where excellent process property is required. BDF2602AP can be compounded to meet the major fluoroelastomer specifications. BDF2602AP can be used…
About Commercial polymers are classified into two types; one is the TFE-P dipolymer type (AFLAS® 100/150 Series), and the other is the TFE-P-VdF terpolymer type (AFLAS® 200Series). AFLAS® 200 Series is characterized by the improved low temperature properties, demoldability and…
About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Low shrinkage version of FE 5640Q Process targets: compression molding Improved scorch resistance at high molding temperatures Proprietary incorporated cure technology Excellent mold release Improved cure technology resulting in…
About Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Medium viscosity Process targets: compression and transfer molding, bonding and calendering Proprietary incorporated cure technology Excellent hot tear strength for removing complex parts from mold (such as shaft seals)&&…
About The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC…
About 3M™ Dyneon™ Fluoroelastomer FE 5610N is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE5610N has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Process targets: injection and transfer moulding Proprietary incorporated cure…
About 3M™ Dyneon™ Fluoroelastomer FE 5624Q is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE 5624Q has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Proprietary incorporated cure technology Process targets: injection and…
About The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC…
About TECNOFLON® P 757 is a medium viscosity, medium fluorine (67%), peroxide curable fluoroelastomer. Tecnoflon® P 757 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability, optimum compression set and good flexibility at low temperatures. Tecnoflon®…
About 66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.&& Product Description Generic 氟橡胶 Material Status Commercial: Active Features Food contact compliance,Copolymer…
About TECNOFLON® FOR 9385F is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5 % fluorine content. Tecnoflon® FOR 9385F is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals…
About 3M™ Dyneon™ Fluoroelastomer FX 3734 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. FX 3734 has an incorporated bisphenol cure system. Special Features Composition: terpolymer of hexafluoropropylene, tetrafluoroethylene and vinylidene fluoride Process targets: compression, injection and transfer…
About Tecnoflon® VPL 45535 is a brand new generation very low temperature peroxide curable fluoroelastomer with outstanding low temperature flexibility (TR10 = -35°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing…