About TECHNYL® A 50H1 Natural is an unreinforced polyamide 66 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, offers excellent filling qualities combined with good stiffness.&& Product Description Supplier BASF…
About Ultra high clarity, low density, low viscosity polyolefin Excellent thermal stability Low Tg (Excellent low temperature properties) Excellent flexibility Non corrosive Excellent color and odor Excellent compatibility with a wide range of polymers Low crystallinity (can be heavily filled)…
About Product Description Generic PA66 Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile Stress Yield yld 80 MPa ISO 527 Tensile Strain Yield yld 45 % ISO 527 Broken BRK, dry dry 4.5 % ISO…
About TECHNYL® A 218W V33 Natural T is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. The product is particularly recommended for the moulding of parts where some translucency is required, as well as…
About Durethan® DPBKV60H2.0EF 900116 (Dry) PA 6, 60 % glass fibers, injection molding, improved flowability, heat-aging stabilized&&Durethan® DPBKV60H2.0EF 900116 PA 6, 60 % glass fibers, injection molding, improved flowability, heat-aging stabilized&&Durethan® DPBKV60H2.0EF 900116 PA 6, 60 %…
About Food Contact SAN KIBISAN PN-107 L125 FG Product Description: High clarity&& Product Description Supplier CHI MEI Generic SAN Material Status Commercial: Active Features Good Clarity,Food contact compliance,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL…
About Eltex® A4090P is a non stabilised high density polyethylene flake (powder) manufactured by INEOS Polyolefins using their supported catalyst process. It is a copolymer with a narrow molecular weight distribution. Applications Carrier for color concentrates, master-batches Benefits and Features…
About Product Description Supplier Trinseo Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Melt Flow Rate 230℃，3.8Kg 2.8 g/10min ISO 1133 Molding shrinkage Flowing flow 0.2-0.6 % ASTM D955 Water Absorption…
About Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Active Features High impact strength,Halogen free,Flame Characteristics Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method…
About PC/ABS polymer alloy, T-2700 series, Automotive series&& Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Active Features High impact resistance,Low Gloss,High liquidity Availabilitys Africa & Middle East ,North America,Latin America,Europe,Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL…
About Product Description Supplier Audia Material Status Commercial: Active Features Excellent Processability,High liquidity,weathering resistance,Heat Resistance, Good Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 38 Shore A ASTM D2240 Tensile Strength 2.0 MPa ASTM D412 Tensile Stress 100%…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 300℃，1.2kg 11 cm³/10min ISO 1133 Density 1190 kg/m³ ISO 1183 Molding shrinkage Parallel 0.5-0.7 % Internal Method Vertical…
About Type: Polyester Thermoplastic Polyurethane (TPU) Special Feature: Good physical properties with chemical resistance and adhesive properties. Wide extrusion processing window Processes: Extrusion: Blown, Flat Die Cast Film, Injection and Blow Molding&& Product Description Supplier Lubrizol Advanced Materials Generic TPU-酯…
About A soft, colorable, flame retardant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material has good fluid resistance and contains non-ether brominated flame retardants. It does not contain metal deactivators. This grade of Santoprene TPV is shear-dependent…
About Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Negative Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.16 g/cm³ ISO 1183 Melt Volume Rate 250℃，5 kg 6 cm³/10min ISO 1133 Molding shrinkage Vertical…
About Product Description Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 2781 Yellow Index 0 ASTM E313 MECHANICAL Nominal value Unit Test method Shore hardness 72 Shore A ISO 7619-1 Abrasion Loss…
About Description High Heat Application Electric & Electronic Housing Automotives Interior & Exterior Housing (Garnish etc)&& Product Description Supplier LG Chemical Generic ABS Material Status Commercial: Active Features High Heat Resistance,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding…
About 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features ECO,V-0,5VA Availabilitys North America,Asia Pacific,Europe Process Methods Injection…
About Product Description Supplier Polyplastics Generic PBT/PC Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.48 g/cm³ ISO 1183 Water Absorption 23℃，24 h 0.1 % ISO 62 MECHANICAL Nominal value Unit Test method Tensile Strength…