About Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard- Injection molding type with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good…
About Fortron 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and rigidity at elevated temperatures allows for…
About Eastman Tritan™ TX2001 is an amorphous copolyester with excellent appearance and clarity. Tritan™ TX2001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation…
About Eastman Tritan™ copolyester TX1501HF is a high flow grade of Eastman Tritan™. Eastman Tritan™ copolyester TX1501HF has viscosity reductions of 40-50% relative to Eastman Tritan™ copolyester TX1001. Eastman Tritan™ copolyester TX1501HF contains a mold release derived from vegetable based…
About Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. EastmanTritan™ TX1001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation…
About TORZEN® U4820L NC01 is a general purpose PA66 resin suitable for injection molding and extrusion applications where fast cycles are required. It is lubricated internally and externally for excellent machine feed and mold release. Available in natural and black.&&…
About Product Description Supplier Zhetie Daphoon Generic Polycarbonate Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 20℃ 1.2 g/cm³ ISO 1183 Transmittance 2 mm ≥89 % ASTM D1003 Melt Flow Rate 300℃，1.20kg…
About Product Description Generic PP not specified Material Status Commercial: Active Features High liquidity Technical Data PHYSICAL Nominal value Unit Test method Melt mass flow rate 230 °C kg 24 g/10min ASTM D1238 Density 0.90 ASTM D792 MECHANICAL Nominal value…
About LAPEROS® E130i is a Liquid Crystal Polymer (LCP) product filled with 30% glass fiber. It is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Active Features Good Rigidity,Good Dimensional Stability,Corrosion…
About LAPEROS® E130i is a Liquid Crystal Polymer (LCP) product filled with 30% glass fiber. It is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Active Features Good Rigidity,Good Dimensional Stability,Corrosion…
About Product Description Supplier Polyplastics Generic polybutylene terephthalate Material Status Commercial: Active Features Glass fiber reinforced Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.66 g/cm³ ISO 1183 1.66 g/cm³ ASTM D792 MECHANICAL Nominal value Unit…
About DURANEX® 3300 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive.…
About DURANEX® 3300 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive.…
About DURACON® M90S is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Primary characteristic: flame rated.&& Product…
About DURACON® M90-45 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Characteristics include: Flame Rated Weather…
About DURACON® M270-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Characteristics include: Flame Rated Fast…
About DURACON® GH-25 is an Acetal (POM) Copolymer product filled with 25% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive.…
About TEPCON® M90 NAT is an Acetal (POM) Copolymer product. It is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL…
About DURACON® AW-01 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Lubricated&& Product…
About DURAFIDE® 6165A6 is a Polyphenylene Sulfide (PPS) product filled with 65% glassmineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Characteristics include: Flame Rated Good Dimensional Stability&& Product…