About Plexiglas® HT121 is a thermoplastic acrylic resin formulated for injection molding applications. This grade has the highest heat resistance of all the Plexiglas® grades. Plexiglas® HT121 has excellent weatherability and optical properties allowing it to excel in applications requiring…
About PLEXIGLAS® Hi-Gloss FT15 black 9V022 is a special acrylic-based polymer. With regard to its high mar resistance good weather resistance good polishability, PLEXIGLAS® Hi-Gloss FT15 9V022 shows comparable properties to those of PLEXIGLAS® standard molding compounds. In addition, PLEXIGLAS®…
About Medium-viscosity grade for the production of extruded cast films and thin-walled profiles and pipes.&& Product Description Supplier BASF Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density…
About Rilsan® BZM 8 O TL is a fiberglass reinforced polyamide produced from a renewable source. This natural grade is designed for injection moulding.&& Product Description Supplier Arkema Generic PA 11 Material Status Commercial: Active Features Renewable resources Availabilitys Africa…
About 注射级 Product Description Supplier DuPont Generic TPEE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 0.38 % Density 1.14 g/cm³ Melt Flow Rate 25 g/10min hardness 57 D MECHANICAL Nominal value Unit Test…
About LEXAN LUX7636C Polycarbonate (PC) resin is a non-filled, extrudable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is UV stabilized(F1 rating) providing additional weathering capability. LEXAN…
About Ultradur B 4520 is a medium viscosity, rapidly freezing injection molding grade. Applications Typical applications include chassis and housings for home appliances, office and sewing machines, and coil formers.&& Product Description Supplier BASF Generic polybutylene terephthalate Material Status Commercial:…
About MVR (330°C) 18 cm³/10 min; easy release; UV stabilized; ‘softening temperature (VST/B 120)=182°C; injection molding – melt temperature 330 – 340°C; Lamp covers; Headlamp lenses&& Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is…
About POLYLAC® PA-757F is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Food Contact Applications. Characteristics include: Flame Rated RoHS Compliant Food Contact Acceptable&&…
About AS55-003 is a blow molding grade high density polyethylene copolymer containing an antistat additive. It provides a good balance of stiffness and stress crack resistance.&& Product Description Supplier ExxonMobil Generic HDPE Material Status Commercial: Active Availabilitys North America,Latin America…
About Applications Photovoltaic Encapsulant Sheet hot Melt Adhesive Performance Uniform VA Contents and MI Excellent optical property Low Gel level and strict contaminant control Good adhesion property in the solar module&& Product Description Supplier LG Chemical Generic EVA Material Status…
About Elvaloy® AC 1125 is a copolymer of ethylene and methyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins. 25% By Weight Methyl Acrylate&& Product Description Supplier DOW Material…
About Elvaloy® AC 34035 is a copolymer of ethylene and butyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins.&& Product Description Supplier DOW Material Status Commercial: Active Features Smoothness…
About Product Description Supplier BASF Generic TPU-醚 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier LG Chemical Material Status Commercial: Active Features Good liquidity,Heat Resistance, Good Process Methods Injection Molding Technical Data optical performance Nominal value Unit Test method Transmittance 3mm 91.5 % ISO 13468-1 IMPACT Nominal value Unit Test method…
About NORYL GTX914 is an unfilled GTX grade with an ideal combination of impact performance, dimensional stability at elevated temperatures, chemical resistance and processability.&& Product Description Supplier SABIC Generic PPO(PPE)+PS+PA Material Status Commercial: Active Features Excellent Processability,High impact resistance,Good Dimensional…
About Hostalen PP H1850 is a very low flow homopolymer with good stiffness toughness balance. The grade features yellowing resistance in contact with cooling water. Typical customer use is automotive expansion tanks. Hostalen PP H1850 is not intended for medical…
About TECHNYL® A 60G1 V25 Black 2N is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT)…
About Product Description Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Volatile Matter ≤0.4 % KM 04 Melt Flow Rate 230 ℃，2.16 kg 2.0-4.5 g/10min ASTM D1238 11.5-13.5 % KM 03 Total Extractables ≤1.6 % KM…
About Product Description Supplier DOW Material Status Commercial: Active Process Methods Extrusion Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…